w***@users.sourceforge.net
2018-12-01 03:12:25 UTC
Revision: 5837
http://sourceforge.net/p/svnbook/source/5837
Author: wuzhouhui
Date: 2018-12-01 03:12:23 +0000 (Sat, 01 Dec 2018)
Log Message:
-----------
1.8/zh: translation of chapter 7 in progress
Modified Paths:
--------------
branches/1.8/zh/book/ch07-customizing-svn.xml
Modified: branches/1.8/zh/book/ch07-customizing-svn.xml
===================================================================
--- branches/1.8/zh/book/ch07-customizing-svn.xml 2018-11-29 06:52:26 UTC (rev 5836)
+++ branches/1.8/zh/book/ch07-customizing-svn.xml 2018-12-01 03:12:23 UTC (rev 5837)
@@ -124,7 +124,17 @@
<indexterm>
<primary>runtime configuration</primary>
<secondary>system-wide</secondary>
- </indexterm>In addition to the per-user configuration area, Subversion
+ </indexterm>
+ 除了每用户配置区域, Subversion 还会考虑全局配置区域, 全局配置区域
+ 允许管理员为所有用户设定一个默认配置. 注意, 每用户配置区域的设置会
+ 覆盖全局配置区域的设置, 而 <command>svn</command> 的命令行参数则会
+ 覆盖每用户配置区域的设置. 对于类 Unix 系统, 全局配置区域在
+ <filename>/etc/subversion</filename>; 对于 Windows 系统, 全局配置区域
+ 在 <filename>Application Data</filename> (同样, 它的确切位置由系统注
+ 表决定) <filename>Subversion</filename> 目录内. 与每用户配置区域不
+ 同的是 <command>svn</command> 不会在启动时尝试创建全局配置区域.</para>
+ <!--
+ In addition to the per-user configuration area, Subversion
also recognizes the existence of a system-wide configuration
area. This gives system administrators the ability to
establish defaults for all users on a given machine. Note
@@ -141,7 +151,9 @@
specified by the Windows Registry). Unlike the per-user
case, the <command>svn</command> program does not attempt
to create the system-wide configuration area.</para>
+ -->
+ <!--
<para>The per-user configuration area currently contains three
files—two configuration files (<filename>config</filename> and
<filename>servers</filename>), and a <filename>README.txt</filename>
@@ -155,21 +167,41 @@
any time you wish to have the default configuration settings
restored, you can simply remove (or rename) your configuration
directory and then run some innocuous <command>svn</command>
- command, such as <userinput>svn --version</userinput>. A new
+ command, such as <userinput>svn - -version</userinput>. A new
configuration directory with the default contents will be
created.</para>
+ -->
+ <para>每用户配置区域包含了三个文件—两个配置文件
+ (<filename>config</filename> 和 <filename>servers</filename>) 和
+ 一个 <filename>README.txt</filename>, <filename>README.txt</filename>
+ 介绍了 INI 格式的语法. 每用户配置区域被创建时, 配置文件包含了
+ Subversion 所支持的选项的默认值, 大多数内容都被分组注释, 注释描述了
+ 选项值将会如何影响 Subversion 的行为. 为了修改配置, 用户只需要用文本
+ 编辑器打开配置文件, 然后修改选项的值. 如果你想恢复每用户配置区域的
+ 默认配置, 只需要删除 (或移动) 每用户配置区域的目录, 然后随便执行一
+ 个无害的 <command>svn</command> 命令, 例如
+ <userinput>svn --version</userinput>, 此时就会重新生成包含了默认配置
+ 的每用户配置区域.</para>
<para>
<indexterm>
<primary>runtime configuration</primary>
<secondary>command-line override</secondary>
- </indexterm>Subversion also allows you to override individual
+ </indexterm>
+ Subversion 还允许用户通过命令行选项 <option>--config-option</option>
+ 修改个别的配置选项, 如果用户想要临时修改配置, 那么这个选项就会很有用.
+ 关于 <option>--config-option</option> 的详细用法, 见
+ <xref linkend="svn.ref.svn.sw"/>.</para>
+ <!--
+ Subversion also allows you to override individual
configuration option values at the command line via
- the <option>--config-option</option> option, which is
+ the <option>- -config-option</option> option, which is
especially useful if you need to make a (very) temporary
change in behavior. For more about this option's proper
usage, see <xref linkend="svn.ref.svn.sw"/>.</para>
+ -->
+ <!--
<para>The per-user configuration area also contains a cache of
authentication data. The <filename>auth</filename> directory
holds a set of subdirectories that contain pieces of cached
@@ -177,6 +209,11 @@
authentication methods. This directory is created in such a
way that only the user herself has permission to read its
contents.</para>
+ -->
+ <para>每用户配置区域还包含了认证数据的缓存. 目录
+ <filename>auth</filename> 内含有多个子目录, 这些子目录包含了
+ Subversion 支持的不同认证方式所需的缓存信息. 目录
+ <filename>auth</filename> 的权限配置仅允许用户进行访问.</para>
</sect2>
http://sourceforge.net/p/svnbook/source/5837
Author: wuzhouhui
Date: 2018-12-01 03:12:23 +0000 (Sat, 01 Dec 2018)
Log Message:
-----------
1.8/zh: translation of chapter 7 in progress
Modified Paths:
--------------
branches/1.8/zh/book/ch07-customizing-svn.xml
Modified: branches/1.8/zh/book/ch07-customizing-svn.xml
===================================================================
--- branches/1.8/zh/book/ch07-customizing-svn.xml 2018-11-29 06:52:26 UTC (rev 5836)
+++ branches/1.8/zh/book/ch07-customizing-svn.xml 2018-12-01 03:12:23 UTC (rev 5837)
@@ -124,7 +124,17 @@
<indexterm>
<primary>runtime configuration</primary>
<secondary>system-wide</secondary>
- </indexterm>In addition to the per-user configuration area, Subversion
+ </indexterm>
+ 除了每用户配置区域, Subversion 还会考虑全局配置区域, 全局配置区域
+ 允许管理员为所有用户设定一个默认配置. 注意, 每用户配置区域的设置会
+ 覆盖全局配置区域的设置, 而 <command>svn</command> 的命令行参数则会
+ 覆盖每用户配置区域的设置. 对于类 Unix 系统, 全局配置区域在
+ <filename>/etc/subversion</filename>; 对于 Windows 系统, 全局配置区域
+ 在 <filename>Application Data</filename> (同样, 它的确切位置由系统注
+ 表决定) <filename>Subversion</filename> 目录内. 与每用户配置区域不
+ 同的是 <command>svn</command> 不会在启动时尝试创建全局配置区域.</para>
+ <!--
+ In addition to the per-user configuration area, Subversion
also recognizes the existence of a system-wide configuration
area. This gives system administrators the ability to
establish defaults for all users on a given machine. Note
@@ -141,7 +151,9 @@
specified by the Windows Registry). Unlike the per-user
case, the <command>svn</command> program does not attempt
to create the system-wide configuration area.</para>
+ -->
+ <!--
<para>The per-user configuration area currently contains three
files—two configuration files (<filename>config</filename> and
<filename>servers</filename>), and a <filename>README.txt</filename>
@@ -155,21 +167,41 @@
any time you wish to have the default configuration settings
restored, you can simply remove (or rename) your configuration
directory and then run some innocuous <command>svn</command>
- command, such as <userinput>svn --version</userinput>. A new
+ command, such as <userinput>svn - -version</userinput>. A new
configuration directory with the default contents will be
created.</para>
+ -->
+ <para>每用户配置区域包含了三个文件—两个配置文件
+ (<filename>config</filename> 和 <filename>servers</filename>) 和
+ 一个 <filename>README.txt</filename>, <filename>README.txt</filename>
+ 介绍了 INI 格式的语法. 每用户配置区域被创建时, 配置文件包含了
+ Subversion 所支持的选项的默认值, 大多数内容都被分组注释, 注释描述了
+ 选项值将会如何影响 Subversion 的行为. 为了修改配置, 用户只需要用文本
+ 编辑器打开配置文件, 然后修改选项的值. 如果你想恢复每用户配置区域的
+ 默认配置, 只需要删除 (或移动) 每用户配置区域的目录, 然后随便执行一
+ 个无害的 <command>svn</command> 命令, 例如
+ <userinput>svn --version</userinput>, 此时就会重新生成包含了默认配置
+ 的每用户配置区域.</para>
<para>
<indexterm>
<primary>runtime configuration</primary>
<secondary>command-line override</secondary>
- </indexterm>Subversion also allows you to override individual
+ </indexterm>
+ Subversion 还允许用户通过命令行选项 <option>--config-option</option>
+ 修改个别的配置选项, 如果用户想要临时修改配置, 那么这个选项就会很有用.
+ 关于 <option>--config-option</option> 的详细用法, 见
+ <xref linkend="svn.ref.svn.sw"/>.</para>
+ <!--
+ Subversion also allows you to override individual
configuration option values at the command line via
- the <option>--config-option</option> option, which is
+ the <option>- -config-option</option> option, which is
especially useful if you need to make a (very) temporary
change in behavior. For more about this option's proper
usage, see <xref linkend="svn.ref.svn.sw"/>.</para>
+ -->
+ <!--
<para>The per-user configuration area also contains a cache of
authentication data. The <filename>auth</filename> directory
holds a set of subdirectories that contain pieces of cached
@@ -177,6 +209,11 @@
authentication methods. This directory is created in such a
way that only the user herself has permission to read its
contents.</para>
+ -->
+ <para>每用户配置区域还包含了认证数据的缓存. 目录
+ <filename>auth</filename> 内含有多个子目录, 这些子目录包含了
+ Subversion 支持的不同认证方式所需的缓存信息. 目录
+ <filename>auth</filename> 的权限配置仅允许用户进行访问.</para>
</sect2>